Unilift
AP, CC and KP pumps are single-stage pumps with half open
impeller (AP12) or with vortex impeller (AP35 and AP50). All Unilift pumps are
equipped with a stainless steel sleeve for cooling during operation. However,
the Unilift CC is largely made of cast metals. The bottom strainer prevents
particles larger than the pump from handling and entering the pump. The
strainer is secured to the pump housing.
Pumps with an "A" in the type designation are equipped with a
float switch. 3-phase versions are provided with an additional starter box that
is connected to the float switch. The delivery side is on top of the pump and
is available in Rp 1 1/2 to Rp 2.
An optional check valve can be mounted in the outlet to prevent backflow.
Applications
Water drainage
Waste water
Industrial water drainage
Rainwater drainage
Swimming pools
Effluent from homes from septic and sludge treatment
systems
Effluent of overpasses, underpasses, etc.
Drainage water from sprinkler systems from garages
Features
and benefits
The Unilift is intended for permanent or temporary free-standing
installations. Most components are made from stainless steel. Cable connected
via plug. Available in both automatic and manual versions. Only phase versions
are equipped with integrated thermal protection.
Characteristics:
Capacity: max. 9.44 l / s
Head height: up to 18.28 meters
For additional information you can download the brochure or contact one
of our advisers by calling the telephone number above.