Andritz ISO Series - Delta Pompen B.V.

Delta Pompen B.V.

Go to content

Main menu:

Brands
Andritz ISO Pump (DIN 24256 ISO 2858 ISO 5199)

Pump description:
The ISO chemistry pump according to ISO2858 / DIN24256 has been developed for maximum durability. The pumps have been developed to pump clean and slightly contaminated liquids that are chemically charged.

ISO Pump: Pump with separate bearing seat, spacer coupling and IEC motor (mounted on same base plate.)

Key features:
Flow rates up to:             300 m³/hr
Heads up to:                      160 m
Casing pressure up to:   16 Bar
Temperature:                   -20ºC to +140ºC
According to:                     ISO2858 / DIN24256

Material:
The pump is available in cast iron (GG20 - A48-900), 1.4408 (AISI316) and according to customer specification. The impeller and seal rings are standard in AISI316.

Impeller:
Closed, designed for maximum efficiency and low pulsation.

Shaft Seal:
The pump shaft seal is made with a single mechanical seal following DIN24960 or double mechanical seal (tandem arrangement). The composition of materials are able to put together by customer specifications.

Motor:
Standard B3 IEC engine can be supplied from any brand. ATEX engines are also possible.

Application:
You can find the ISO Pumps in many applications where clean and lightly contaminated liquids must be pumped. For larger capabilities, you can apply the SP range of Andritz.
Copyright © All rights reserved.
Delta Pompen B.V.
Rigaweg 17
9723 TE Groningen (NL)
Back to content | Back to main menu